Power Output: 5 W

Wide Band

• VHF: 134 - 174 MHz
• UHF: 400 - 470 MHz and 450 - 512 MHz

VX-920 series with LCD version: Maximum 512 channels / 32 Groups

VX-920 series without LCD version: Maximum 48 channels / 3 Groups

Large LCD (Dot Matrix / 12 Characters + 7 Segments / 3 Characters)

Wide / Narrow (12.5 / 20 / 25 kHz), programmable per channel)

CTCSS/DCS Encode / Decode

DTMF ANI / DTMF Paging

Built-in 5-Tone Signaling

2-Tone Encode and Multiple-2 Tone Decode

User Selectable Tone

Submersible External Microphone MH-66 Series (optional)

Scan: Channel Scan, Priority Scan, Dual Watch, Follow-me Scan, Follow-me/DW and TA Scan

Compander (Wide and Narrow Band)

Loud 700 mW Audio Output

AF Minimum Volume

7-Color LED: Flash pattern and color can be set as 2-Tone or 5-Tone Incoming Call Alert or for Emergency

Lone Worker

RX / TX Battery Save

Programmable Home Channel function

Direct Channel Recall (#1-#4)

Programmable Function Keys

BCLO / BTLO and TOT

Remote Radio Stun / Kill / Revive (5-Tone)

Clear Voice (Improves Tx audio in noisy environments)

Audio Pitch Control

Speed Dial (16-key version only)

ARTS™ (Auto-Range Transpond System)

Encryption (Optional FVP-36 or FVP-35 required)

Voice Storage (Optional DVS-5 required)

ANI Encoder (MDC-1200®, GE-Star® and DTMF: Optional VME-100 required) ANI Encoder / Decoder (MDC-1200®, GE-Star® and DTMF (Encode): Optional VMDE-200 required)

PC Programmable

MIL-STD 810C/D/E/F

Intrinsically Safe

 

VX-929 / 924 with LCD: Maximum 512 Channels/32 Groups VX-921 w/o LCD: Maximum 48 Channels/3 Groups

The LCD-equipped version provides massive channel storage capability: up to 512 channels may be programmed into as many as 32 groups. A single radio may therefore be programmed with channel sets for a number of different jurisdictions or organizations, ensuring seamless interoperability. The VX-920 Series without the LCD can accommodate up to 48 channels in up to three groups.

CTCSS/DCS Encode/Decode
High-performance Encoder/Decoder circuits for both CTCSS and Digital Code Squelch are provided, for access to tone/code controlled systems. DCS is ideal for crowded RF environments, providing superior immunity from false opening of the squelch.

DTMF ANI/DTMF Paging
Fleet and network operation are enhanced by the built-in DTMF ANI/Paging circuit.

2-Tone Encode and Multiple 2-Tone Decode
The VX-920 Series can transmit a 2-Tone paging call, and can receive 2-Tone calls using different tone combinations

User Selectable Tone
One of the front panel's "programmable" keys may be designated so as to allow the user to select a CTCSS or DCS tone from a pre-defined Tone Table.

Scan: Channel Scan, Priority Scan, Dual Watch, Follow-me Scan,Follow-me Dual Watch, and TA Scan

The VX-920 Series provides unmatched flexibility in its scanning features. Designed to optimize operation in a wide variety of system environments, these scanning capabilities ensure that you never miss an important call!

Compander (Wide and Narrow Band)
For operation in systems requiring Companding, the VX-920 Series portables include both Wide- and Narrow-band Companding circuitry, programmable channel by channel.

Lone Worker
The Lone Worker feature is designed to emit an alarm for 30 seconds when the Lone Worker Timer (programmed by the dealer) has expired. If the user does not reset the timer by pressing the PTT switch, the radio switches to the Emergency mode.

RX/TX Battery Saver
When engaged, the Receive-mode Battery Saver rapidly pulses the portable on and off, reducing current consumption and extending battery life. If a call is received, the Battery Saver is disengaged, and normal operation resumes. On transmit, the Battery Saver will reduce transmitter power, thus extending operating time, when you are within close range of a strong repeater or dispatch center.

Programmable Function Keys
Customization of feature access is easily accomplished at the time of programming, thanks to the "programmable" keys that may be assigned functions needed most in your operating environment.

PC Programmable
All channel and other configuration data may be uploaded to the portable by the dealer in a matter of minutes, allowing efficient setup of a fleet of radios when rapid deployment is required.

ANI Encoding and Decoding (MDC-1200®, GE-Star®, and DTMF (Encode): optional VME-100 or VMDE-200 required)
Automatic Number Identification, triggered by the pressing of the PTT key, is available in the most popular industry-standard formats, via the optional VME-100 (for Encoding only) or VMDE200 (for Encoding and Decoding) module.